Kalamazoo Industries S460D 4 X 60 Inch Vertical Bench Top Belt Sander
No reviews
$1,995.00
Kalamazoo Industries S460D 4 X 60 Inch Vertical Bench Top Belt Sander
The S460D 4 x 60 inch vertical bench top belt sander belt speed is 3600 and a 1HP motor which is a good speed and power for general clean up and deburring. The S460D features steel construction, a robust 1HP 3450 motor, an adjustable cast iron work table, spring belt tension, and an on/off switch. Any belt type is useable with this belt sander to reach your required surface finish.
THIS VERTICAL 1HP BELT SANDER IS DESIGNED TO DO THE FOLLOWING
Bevel and deburr
Square and end
Round flat corners
Surface clean up
Lite to medium material removal
S460D Specifications
1HP 1PH or 3 phase (specify voltage and phase)
ON/OFF switch.
1PH 110V amp draw is 11.8 amps / 220V amp draw is 5.9 amps.
3PH 220V amp draw is 2.8 amps/440V amp draw is 1.5 amps.
4″ x 60″ sanding belt
Direct drive.
Belt speed: 3600 SFPM
Steel outer frame.
Cast iron inner frame.
Sealed ball bearings in idler pulley (top) pulley.
Reversible and replaceable steel platen 4″ x 17″.
Adjustable cast iron work table that measures 5″ x 8″ with a 5/8″ slot in the work table. That can accommodate a mitre gauge.
Spring belt tension. With a quick belt tension release lever.
Requires truck delivery. A representative will contact you after you place your order with best shipping methods and shipping charges. Your order will be finalized once you approve the shipping charges.
Requires truck delivery. A representative will contact you after you place your order with best shipping methods and shipping charges. Your order will be finalized once you approve the shipping charges.
